NEC Corporation, in collaboration with the Kyoto Institute of Technology and a representative Japanese lacquerware artist, Dr. Yutaro Shimode, announced today the development of a bioplastic using resin (cellulose resin*1) from grasses, trees and other non-edible plant resources that features the highly regarded "Urushi black" color of Japanese traditional lacquerware*2.

In order to create the new cellulose-based bioplastic, NEC developed a unique technology for mixing additives to adjust coloration and light reflectance of the material, enabling, for the first time, the realization of optical properties (low brightness, high glossiness, etc.) similar to the deep and shiny "Urushi black" color of high-grade Japanese lacquerware. The new plastic balances a high level of environmental friendliness and decorativeness and makes it possible to mass produce products of various shapes and patterns using the usual molding process for ordinary plastics.
 
"In response to the depletion of resources and food shortage problems, the need for non-edible-plant-based plastics is increasing. In addition to NEC's history in the development of a unique cellulose-based plastic (NeCycle(R)*3) using non-edible plant materials for use in durable electronic products, we have now developed a new bioplastic that, in addition to high functionality, realizes the decorativeness of Japanese lacquerware, which is highly evaluated throughout the world, and illustrates a beauty well beyond what petroleum-based plastics can provide," said Dr. Masatoshi Iji, Research Fellow, IoT Devices Research Laboratories NEC Corporation.

This development was carried out in collaboration with the Kyoto Institute of Technology's Future-Applied Conventional Technology Centre, which is known for its outstanding achievements in future-applied conventional technology research (scientific analysis of traditional crafts and their applications in advanced material science), and Dr. Yutaro Shimode*4, a prominent Japanese lacquerware artist.  

The development process involved, first, the fabrication by Dr. Shimode of a Japanese lacquerware "Urushi craft" model (transparent resin plate repeatedly coated with Japanese lacquer and polished by hand) that served as the standard for the advanced optical properties exhibited by high-quality Japanese lacquerware. Scientific analysis was performed on Japanese lacquerware at the Kyoto Institute of Technology. Based on the results, NEC then developed an optimized technology for modifying and mixing of the additives.

Going forward, NEC will pursue business partnerships aimed at commercializing the new bioplastic in durable products and high-grade materials that require a high level of decorativeness, such as the interior components of luxury cars.

Key features of the "Urushi black" bioplastic

1. Use of non-edible plant materials that are readily available as the main ingredient
The new bioplastic uses cellulose resin produced from cellulose that is widely available from non-edible plant resources, such as grasses, the stalks of cereal crops and wood, and has the potential to be used as a substitute for petroleum.

2. Realizes the advanced optical properties (Urushi black) of high-grade Japanese lacquerware
Black coloring agents and highly refractive organic ingredients were mixed with the above cellulose resin as special additives to adjust the resin's coloration and light reflectance properties. By dispersing the additives into fine particles, NEC became the first to achieve the advanced optical properties exhibited by high-grade Japanese lacquerware. The new bioplastic was able to exhibit the deep and shiny "Urushi black" color characteristic of Japanese lacquerware, at a quality similar to the high-grade "Urushi craft" model fabricated by Dr. Yutaro Shimode, a leading lacquerware artist in Japan

3. The new bioplastic can be mass-produced into products of various shapes using the molding process for ordinary plastics
Conventionally, lacquerware is produced by coating the surface of substrates with lacquer and polishing them. For this newly developed bioplastic, the materials can be heated, melted, and injected into molds (mirror-finishing) to form shapes (injection molding), as with ordinary plastics. This makes it possible to mass-produce the bioplastic into products of various shapes and patterns.

NEC is scheduled to present this technology at the 24th Material Processing Technical Conference (M&P 2016) to be held at Waseda University in Tokyo from November 25 to 26, 2016.

 

Source : nec.com

Report Abuse